2024 Newport Highway Sevierville, TN 37876 865-365-4232

Winter Is Here And So Is The Snow

How To Safely Remove Ice and Snow From Your Car

Winter can bring a variety of problems with your car – from icy windshields to frozen lock mechanisms. But one of the most common winter car troubles is having to clear away ice and snow, which can quickly become an annoying and potentially dangerous job. To make things easier we’ll provide you with some simple tips and tricks for safely removing ice and snow from your car.

Check Your Car’s Temperature

The first step in safely removing ice and snow is to make sure that your car is at the right temperature. Generally speaking, you don’t want the engine to be too hot or too cold; if it is too cold, any sudden change in heat could cause glass (including the windshield) to crack or shatter. So be sure to start your car up and let it sit idle until its temperature reaches a comfortable “warm-to-the-touch” level before attempting any removal attempts.

Start With The Windows

Once you have an acceptable temperature inside your car, it’s time to start removing that pesky layer of ice and snow! The best place to start is with the windows; this will allow you maximum visibility when driving once everything has been cleared away. Begin by scraping off any snow or ice build up on the exterior of each window using either a plastic or rubber scraper or even a credit card; then move on to clearing away frosty condensation from inside (for this, a cloth should do). Once you have removed as much as possible, turn on your defroster until all glass is completely cleared away. 


Use A Deicing Agent

If scraping alone doesn’t seem to cut it – especially if you are dealing with thick layers of frozen water – consider using a deicing agent like rock salt or even diluted rubbing alcohol (make sure not to use straight rubbing alcohol as this could damage paint jobs). Sprinkle these substances onto the problem areas on both the outside and inside of your windows (just remember not to get any of these agents on any part of your vehicle’s interior). Let it sit for a few minutes before attempting another scrape – this should help break up large chunks of ice into smaller pieces that can be more easily removed. 

Finish With A Cleaning Wipe Down

Once all visible snow/ice has been removed from both exterior AND interior surfaces, give everything one final wipe down using paper towel or newspaper – just make sure whatever material you are using does not contain any dyes/inks that could stain fabric surfaces like dashboard coverings or floor mats! This will ensure no dust remnants remain after completion and prevent interior surfaces from becoming wet due to any residual moisture. By following the simple steps outlined above, you can make short work of removing snow and ice from your car.

Winter Is Here And So Is The Snow

How To Safely Remove Ice and Snow From Your Car

Winter can bring a variety of problems with your car – from icy windshields to frozen lock mechanisms. But one of the most common winter car troubles is having to clear away ice and snow, which can quickly become an annoying and potentially dangerous job. To make things easier we’ll provide you with some simple tips and tricks for safely removing ice and snow from your car.

Check Your Car’s Temperature

The first step in safely removing ice and snow is to make sure that your car is at the right temperature. Generally speaking, you don’t want the engine to be too hot or too cold; if it is too cold, any sudden change in heat could cause glass (including the windshield) to crack or shatter. So be sure to start your car up and let it sit idle until its temperature reaches a comfortable “warm-to-the-touch” level before attempting any removal attempts.

Start With The Windows

Once you have an acceptable temperature inside your car, it’s time to start removing that pesky layer of ice and snow! The best place to start is with the windows; this will allow you maximum visibility when driving once everything has been cleared away. Begin by scraping off any snow or ice build up on the exterior of each window using either a plastic or rubber scraper or even a credit card; then move on to clearing away frosty condensation from inside (for this, a cloth should do). Once you have removed as much as possible, turn on your defroster until all glass is completely cleared away. 


Use A Deicing Agent

If scraping alone doesn’t seem to cut it – especially if you are dealing with thick layers of frozen water – consider using a deicing agent like rock salt or even diluted rubbing alcohol (make sure not to use straight rubbing alcohol as this could damage paint jobs). Sprinkle these substances onto the problem areas on both the outside and inside of your windows (just remember not to get any of these agents on any part of your vehicle’s interior). Let it sit for a few minutes before attempting another scrape – this should help break up large chunks of ice into smaller pieces that can be more easily removed. 

Finish With A Cleaning Wipe Down

Once all visible snow/ice has been removed from both exterior AND interior surfaces, give everything one final wipe down using paper towel or newspaper – just make sure whatever material you are using does not contain any dyes/inks that could stain fabric surfaces like dashboard coverings or floor mats! This will ensure no dust remnants remain after completion and prevent interior surfaces from becoming wet due to any residual moisture. By following the simple steps outlined above, you can make short work of removing snow and ice from your car.

Text Us